looking for a roll cage shop

sandman · 04-13-2007, 09:22 AM

anything in or around RI?

quikstreet69 · 04-13-2007, 10:02 AM

Tube chassis designz in hanson,ma He has a website http://www.tubechassisdesignz.com/ owners name is John.

sandman · 04-13-2007, 10:10 AM

thanks not too far at all. calling now

badpewter-z · 04-13-2007, 12:07 PM

not all that close to RI but does amazing work and isnt overpriced

Xplicit Racing Design

Ask for John
Great Guy abd Great craftsmenship

http://www.xplicitracingdesign.com/

did my car about a month ago after i get the run around from a few places .

DaveSVT2000 · 04-13-2007, 12:33 PM

Quote:

Originally Posted by quikstreet69

Tube chassis designz in hanson,ma He has a website http://www.tubechassisdesignz.com/ owners name is John.

+ 1

He did mine, came out awesome !!!!

OG Killah · 04-13-2007, 12:51 PM

Quote:

Originally Posted by quikstreet69

Tube chassis designz in hanson,ma He has a website http://www.tubechassisdesignz.com/ owners name is John.

best turn around time by far is another plus. you won't be disappointed with the work at all.

BONESTOCK · 04-13-2007, 04:09 PM

Quote:

Originally Posted by quikstreet69

Tube chassis designz in hanson,ma He has a website http://www.tubechassisdesignz.com/ owners name is John.

That's were I got mine done! Great guy and awesome work!!

WETDRM · 04-13-2007, 04:55 PM

Quote:

Originally Posted by badpewter-z

not all that close to RI but does amazing work and isnt overpriced

Xplicit Racing Design

Ask for John
Great Guy abd Great craftsmenship

http://www.xplicitracingdesign.com/

did my car about a month ago after i get the run around from a few places .

i think hes a member on here

Superskwrl · 04-13-2007, 07:03 PM

Quote:

Originally Posted by WETDRM

i think hes a member on here

think his sn is "corvettecrap"

Dont know him etc, but the 2 cars @ w.o.w. had very nice fab work.

Tube chassis and DMC both good also

03COBRABOY · 04-14-2007, 04:22 PM

www.dmcracing.com

where i got mine done..Denis is cool as shit

Mr Joshua · 04-14-2007, 04:43 PM

Quote:

Originally Posted by DaveSVT2000

+ 1

He did mine, came out awesome !!!!

what specs? w/ or w/o interior in place? painted? unpainted?

DaveSVT2000 · 04-14-2007, 06:30 PM

Quote:

Originally Posted by Mr Joshua

what specs? w/ or w/o interior in place? painted? unpainted?

6 point, 1.75 diameter, .084 wall thickness, chromoly (sp?), without the interior in place, unpainted, $700. Took him two days to do.

BONESTOCK · 04-14-2007, 06:35 PM

Quote:

Originally Posted by DaveSVT2000

6 point, 1.75 diameter, .084 wall thickness, chromoly (sp?), without the interior in place, unpainted, $700. Took him two days to do.

I got an 8 point, welded axle tubes, through the floor subframes, outriggers, chromoly, unpainted.
For $1200. Took him a couple days also.

I removed the passenger seat and rear seats. That's it.

Mr Joshua · 04-14-2007, 07:07 PM

Quote:

Originally Posted by DaveSVT2000

6 point, 1.75 diameter, .084 wall thickness, chromoly (sp?), without the interior in place, unpainted, $700. Took him two days to do.

nice.. any problems putting the interior back in? clearance issues once the int was back in?

DaveSVT2000 · 04-14-2007, 07:33 PM

Quote:

Originally Posted by Mr Joshua

nice.. any problems putting the interior back in? clearance issues once the int was back in?

Well, remember, I have no back seat, so that helped.

It was a bitch getting the passenger seat back in, with the center consol getting in the way, I had a hard time twisting the seat in over the bar becasue of the consol, but it did go eventually by folding seat forward making it small as possible..

Mr Joshua · 04-14-2007, 07:42 PM

Quote:

Originally Posted by DaveSVT2000

Well, remember, I have no back seat, so that helped.

It was a bitch getting the passenger seat back in, with the center consol getting in the way, I had a hard time twisting the seat in over the bar becasue of the consol, but it did go eventually by folding seat forward making it small as possible..

you left the console and dash in... took the carpet and seats out? but left the interior 1/4 plastics, and headliner? just trying to get a feel for what i should install/remove before taking it there..

DaveSVT2000 · 04-14-2007, 08:14 PM

Sorry Josh, I should have been more specific..

The rear 1/4 trim pieces stayed, obviously the dash stayed, the headliner stayed, and the driver's side seat stayed.

I took out the pass. seat, the consol, the carpet, rocker trim panels, and the small kick panels in both footwells.

04-13-2007, 09:22 AM	#1
sandman Registered User Join Date: Jun 2005 Location: Rhode Island Posts: 2,096	looking for a roll cage shop anything in or around RI? __________________

04-13-2007, 10:02 AM	#2
quikstreet69 Racer Join Date: Oct 2006 Location: Waltham,MA Posts: 77	Tube chassis designz in hanson,ma He has a website http://www.tubechassisdesignz.com/ owners name is John. __________________ 66 Super Stock Nova 10.80s N/A lil 283 3 69 camaros 1 slow 1 real slow 1 RS in boxes 83 Monte SS 9 sec cruiser(sold) 80 Malibu Pro Sweet-80 Bu granny car 78 Malibu garage ornament-78 two tone bu 66 Chevelle in the body shop(2 years later) 69 SS396 chevelle in hiding 00 Camaro SS

04-13-2007, 10:10 AM	#3
sandman Registered User Join Date: Jun 2005 Location: Rhode Island Posts: 2,096	thanks not too far at all. calling now __________________

04-13-2007, 12:07 PM	#4
badpewter-z Registered User Join Date: Feb 2006 Location: uxbridge, ma Posts: 327	not all that close to RI but does amazing work and isnt overpriced Xplicit Racing Design Ask for John Great Guy abd Great craftsmenship http://www.xplicitracingdesign.com/ did my car about a month ago after i get the run around from a few places . __________________ 2000 m6,,AFR h/c,9",Built/Tuned with Slowhawk www.slowhawkperformance.com new for 2009 418/TrickFlow 225's 2007 season- Forged 383 10.95 @ 126.71 1.5 60' Click here to see Video

04-14-2007, 04:22 PM	#10
03COBRABOY Five-Oh in the Oh-Three Join Date: Oct 2003 Location: Franklin Posts: 10,733	www.dmcracing.com where i got mine done..Denis is cool as shit __________________ Silver '07 F350 4x4 CC PSD Silver/Gray '07 Suzuki GSX-R 750 Silver '03 Cobra Coupe Auto 9.94@135 w/ a 1.36 -Eaton, NO Nitrous First Eaton car into the 9s!!! old setup 10.01@138 w/ a 1.49 spinning BAD (100 shot) Click here for all my video's!!!

04-14-2007, 08:14 PM	#17
DaveSVT2000 Registered User Join Date: Feb 2004 Location: Central Mass. Posts: 1,994	Sorry Josh, I should have been more specific.. The rear 1/4 trim pieces stayed, obviously the dash stayed, the headliner stayed, and the driver's side seat stayed. I took out the pass. seat, the consol, the carpet, rocker trim panels, and the small kick panels in both footwells. __________________ 1993 Cobra # 2162 2000 Cobra R # 76 2003 Mercury Marauder 1997 F - 350 Worktruck 2003 F - 150 Supercrew